-3- h hitron universal input ac-dc pcb open frame single output 12 watts internal switching power supplies HVI12 series features: accommodate universal ac sources low-profile pcb format meet universal safety standards emi meet cispr pub. 22 & fcc class b ce marking compliance specification input specification input voltage: range typ. 90-264vac. rating 100 to 240vac. input connector: molex 5045-na or jst b3b-xh-a. input frequency: 47-63hz. inrush current: typ. 20a @230vac. input current: typ. 0.34a @115vac, 0.17a @ 230vac. dielectric withstand: meet iec 60950-1. emi: meet cispr pub.22 & fcc class b. hold-up time: typ. 10ms @115vac, 40ms @230vac. earth leakage: typ. 0.3ma @230vac. output specification output voltage: see ratings chart. output current: see ratings chart. output wattage: typ. 10-12 watts. output connector: molex 5045-na or jst b3b-xh-a. line regulation: typ. 0.1%. load regulation: main vo1 typ. 1-2.0%. noise & ripple: typ. 1% peak to peak. ovp: built-in at main output vo1 (zener diode). adjustability: available at main output vo1. overload protection (olp): . fully protected against output overload and short circuit. olp set at about 125-150% rating output wattage. consult the factory for olp setting. general specification efficiency: typ. 70-75%. switching frequency: typ. 45k hz. circuit topology: fixed frequency flyback circuit. transient response: output voltage returns in less than 3ms following a 25% load change. safety standard: iec 60950-1/ul 60950-1 class i. operating temperature: 0 to +50c. storage temperature: -20 to +85c. temperature coefficient: typ. 0.04% /c. cooling: free air convection. construction: pcb open frame format. power density: 2.4 watts / cubic inch. note: due to requests in market and advances in technol ogy, specifications subject to change without notification. for the details of safety approval, please consult the factory.
-4- output voltage / current ratings chart single output defined output voltage (vdc) ouput voltage (vdc) / current (a) 3.0 vdc any voltage 24.0 vdc 3.0-4.0v/ 3.0-2.7a, 4.1-5.0v/ 2.6-2.4a, 5.1-6.0v/2.3-2.0a, 6.1-7.0v/ 1.9-1.7a, 7.1-8.0v/ 1.6-1.5a, 8.1-9.0v/ 1.4-1.3a, 9.1-10.0v/ 1.3-1.2a, 10.1-11.0v/ 1.1-1.0a, 11.1-12.0v/ 1.0a, 12.1-13.3v/ 0.9a, 13.4-15.0v/ 0.8a, 15.1-17.1v/ 0.7a, 17.2-20.0v/ 0.6a, 20.1-24.0v/0.5a, 24.0v/ 0.6a. note: refer to the upper chart or specify the v/a rati ngs and consult factory for the exact model no. single output (model no. for example) main vo1 @ model no. volt. typ. HVI12-03030 3.0v 3.0a HVI12-03329 3.3v 2.9a HVI12-05024 5.0v 2.4a HVI12-09013 9.0v 1.3a HVI12-12010 12.0v 1.0a HVI12-15008 15.0v 0.8a HVI12-18006 18.0v 0.6a HVI12-24005 24.0v 0.5a HVI12-24006 24.0v 0.6a symbol: " " ovp built-in. "@" adjustable. mechanical dimensions: mm [inches] weight: 54.0g (1.9 oz.) input & output connectors pin assignment ac input single output assignment ac-line ac-neutral ac-ground vo1 dc com connector & pin # p1-l p1-n p1-g p2-2 p2-1 mating connector: molex 5051-n/ jst xhp-3.
|
